Nitto Denko SPV 30804

Nitto Denko SPV 30804 Nitto Denko SPV 30804

Protection Film for Laser Cutting


Application of Film

Protection of surfaces during mechanical processing, protection against damage (scratches, abrasion, dirt) during storage and transportation. Resists UV radiation and is suitable for outdoor use.
Typical Surface: Stainless Steel(BA and a range of grit and brush finishes)
Aluminium-Anodised (shiny and matt)
Matt Plastic substrates (PMMA, Polystyrol, PVC,…)
Preferably the film should be applied by mechanical means. Best results are obtained at an application temperature between 15c and 40c.


Adhesive properties are susceptible to change due to the following parameters: chemical and physical state of the surface to be protected, presence of impurities within or on the substrate, elongation of the film during application, temperature of surroundings and of substrate. Tests should be conducted under actual application conditions.


The film can be stored for 6 months, in dry conditions, in its original packaging. The rolls should be protected from extreme temperature and direct sunlight. Out of its container, it should be protected from dust and other impurities.

Additional Info

  • Thickness (inches): 0.0032
  • Adhesive Type: Rubber
  • Material Type: PE Film
  • Density: N/A
  • Colors: White/Black, White/Black
  • Market: General Purpose, Facade, Window & Door, Transportation
  • Cell Type: N/A
  • Liner: N/A
  • Adhesive Coating Options: Single Sided
  • Custom Colors: No
  • Custom Thickness: N/A
  • Custom Width (inches): Yes
  • Minimum Width (inches): 1
  • Maximum Width (inches): 60
  • Standard Length (feet): 990

Contact a
TBP Representative

Online Inquiry Form

or, call us at 800.850.3338